Specificaitons:

Power source: 100~130V/AC 220~240V/AC
Power frequency: 50~60Hz
Detection range: 120
Rated Load1200w(220~240V/AC)
800W(100~130V/AC)
Time delay: 5Sec. ~12min.
Detection Distance12m(22)
Ambient light<5Lux~Sunshine light
Work Temperature: -20~40
Power consumption: 0.45W (static 0.1W)
Installation height: 2~4.5m
Detection motion speed: 0.6-1.5m/s
Working humidity: <93%RH

Sensor Function:

Identify day and night automatically. Can adjust ambient light according to your
Desirewhen turn to SUN(max. ), it will work day and night. When turn to MOON (min. ), it will work only under less than 3LUX circumstance. As to Adjustment, Please refer to test.
Detection distance can be set according to installation position and detection field.
The power show and detection show: They will flash once every 4 seconds after
Plugging the wire, and flash twice times per second when receiving the signals. At the same time, it shows if the sensor is in the normal conditions for detection.
Time-Delay added continually: When it receives a second induction signal after the first inductor, you should input time once more on the rest of the first time-delay basic.
(Set time).
Time-Delay adjustment: It can be set according to your desire. The minimum is 5sec; The maximum is 8min.

Installtion: (see Fig. 3)
Switch off the power:
Screw off the nail on the bottom, Open the wire hole.
The power wire and the load wire are bored in the bottom.
The sensor is fixed on the selected position with the inflated screw:
Connect the power and the load with the connection-wire column according
To the sketch.
Put the top cover on the sensor, turn it counterclockwish and you will
Hear "bong", So you can test it.